DESCRIPTION
The WM8974 is a low power, high quality mono CODECdesigned for portable applications such as Digital Still Cameraor Digital Voice Recorder.
The device integrates support for a differential or single endedmic, and includes drivers for speakers or headphone, andmono line output. External component requirements arereduced as no separate microphone or headphone amplifiersare required.
Advanced Sigma Delta Converters are used along with digitaldecimation and interpolation filters to give high quality audio atsample rates from 8 to 48ks/s. Additional digital filteringoptions are available in the ADC path, to cater for applicationfiltering such as ‘wind noise reduction’, plus an advancedmixed signal ALC function with noise gate is provided. Thedigital audio interface supports A-law and -law companding.An on-chip PLL is provided to generate the required MasterClock from an external reference clock. The PLL clock canalso be output if required elsewhere in the system.
The WM8974 operates at supply voltages from 2.5 to 3.6V,although the digital supplies can operate at voltages down to1.71V to save power. The speaker and mono outputs use aseparate supply of up to 5V which enables increased outputpower if required. Different sections of the chip can also bepowered down under software control by way of the selectabletwo or three wire control interface.
WM8974 is supplied in a very small 4x4mm QFN package,offering high levels of functionality in minimum board area, withhigh thermal performance.
FEATURES
Mono CODEC:
Audio sample rates:8, 11.025, 16, 22.05, 24, 32, 44.1, 48kHz
DAC SNR 98dB, THD -84dB (‘A’-weighted @ 8 – 48ks/s)
ADC SNR 94dB, THD -83dB (‘A’-weighted @ 8 – 48ks/s)
On-chip Headphone/Speaker Driver with ‘cap-less’ connect
- 40mW output power into 16
/ 3.3V SPKVDD- BTL speaker drive 0.9W into 8
/ 5V SPKVDD Additional MONO Line output
Multiple analogue or ‘Aux’ inputs, plus analogue bypass path
Mic Preamps:
Differential or single end Microphone Interface
- Programmable preamp gain
- Psuedo-differential inputs with common mode rejection
- Programmable ALC / Noise Gate in ADC path
Low-noise bias supplied for electret microphones
OTHER FEATURES
5 band EQ (record or playback path)
Digital Playback Limiter
Programmable ADC High-Pass Filter (wind noise reduction)
Programmable ADC Notch Filter
On-chip PLL
Low power, low voltage
- 2.5V to 3.6V (digital: 1.71V to 3.6V)
- power consumption <10mA all-on 48ks/s mode
4x4x0.9mm 24 lead QFN packageAPPLICATIONS
Digital Still Camera Audio CODEC
Wireless VoIP and other communication handsets / headsets
Portable audio recorder
General Purpose low power audio CODEC
The product is in the warehouse and can be shipped immediately
***************************************************************
FOR MORE DETAILS , PLEASE CONTACT US, THANK YOU.
Email:
[email protected]